per page
8 Item(s)
VETUS HYDRAULIC NYLON HOSE

VETUS HYDRAULIC NYLON HOSE

€10.71
Suitable for cylinders MTC52-175. Requires sleeve insert HS145S.
VETUS STAINLESS STEEL FLANGE TYPE: HTPF

VETUS STAINLESS STEEL FLANGE TYPE: HTPF

From: €42.49

HTPF & HTPF2: stainless steel flange can be used to fit a pump type HTP HTPF3: for situations where the HTPF or HS1000 wheel adjuster may fill with water.
VETUS 6.5MM HS145S SLEEVE INSERT FOR NYLON HOSE

VETUS 6.5MM HS145S SLEEVE INSERT FOR NYLON HOSE

€1.53
Push in support sleeve for HHOSE6 6 x 10 mm hose and 10 mm compression fittings found on HPT3010/4010 Helm Pumps/MTC52 -MTC175 cylinders.
VETUS HYDRAULIC STEERING OIL

VETUS HYDRAULIC STEERING OIL

€16.65
SPECIFICATIONS: 22 CST, DIN 51524
VETUS BY-PASS VALVE FOR 10 MM TUBING

VETUS BY-PASS VALVE FOR 10 MM TUBING

€69.75
If a change-over to tiller steering is required an installation of a by-pass valve is necessary.
DUAL NON RETURN VALVE BLOCK (Type K30/140B)

DUAL NON RETURN VALVE BLOCK (Type K30/140B)

€289.00

If dual station steering is required, then it is necessary to install this block, or to use two steering pumps with built in non-return valves (type HTPR).

CONNECTION KIT FOR DUAL NON RETURN VALVE

CONNECTION KIT FOR DUAL NON RETURN VALVE

From: €69.75

Fitting kitS to be used with K30/140.
per page
8 Item(s)