Tag Archives: Wooden boat

  • Wooden boat restoration (or so I hope!).

    The number one thing I know about wooden boats is that my dad has said we are to hit him over the head with a shovel should he ever buy another one. And that’s after only owning a GP14 for the better part of the last 20 years. So what has possessed me to take on a 26ft mahogany folk boat? Not a clue. But here we are.

    I know about as much about wooden boats as any other twenty something sports boat sailor, so this is going to be an interesting learning project. I am going to keep you all up to date on how she is going, what I am doing and what is, and more likely, isn’t working.

    I am very lucky to have been working in the marine trade for the past 4 years, 3 in Dublin and 1 in Cork, so even if I don’t know what I’m doing, I know who to ask.

    For all of you looking to take on a similar project with little to no experience of working on wooden boats, this journey will either be confirmation that anyone can learn the skills required in wooden boat maintenance…. Or it will reaffirm for you that wooden boat ownership should be left to those initiated few who can identify rotten teak from 20 paces.

    So, the boat! She is a 26ft mahogany folk boat with a stepped up coach house. She has a teak deck which has been coated in cascover. All her planks and ribs are sound, although 5 ribs need replacing due to cracking. There is a small bit of rot on her toe rail on one side but other than that she is solid.

    She is also filthy as she has been sitting in the boat yard for the past 2 years.

    She originally had a small diesel engine on board, but that has been removed pre my ownership. She has her rudder, tiller, keel and spars all in good condition.

    All in all she is a manageable project. Her hull and keel are in good condition, there is very little structural work to be done and she has most of her fittings still. These were my main criteria when considering taking on this project, the boat had to float e.g. no holes and no rotten planks (When you get into replacing planks you are taking on a much bigger project). The coach house had to be intact and solid. This is just practical, rebuilding a coach house wouldn’t be the most difficult project, but if it is damaged or missing it means the cabin and bilge have been exposed to the elements which increases the likelihood of rot, something to try and avoid when acquiring a wooden boat. Mine is missing her windows, so she was somewhat exposed, but luckily the boat yard she is in pumped her out, so it was just the build-up of dirt and sludge I had to deal with (will have to deal with, funnily enough I have thus far found many jobs than need doing ahead of cleaning the bilge).

    I have gotten her without a name and I have yet to name her, so “her” is what we shall be referring to my lovely boat as until I settle on one.

    So there we go, that’s me and the boat. I hope you will follow us on what promises to be a funny (at times not intentionally so), and hopefully informative, journey from somewhat sad in the corner of a boat yard, to sailing in the high seas (or at least cruising from Crosshaven to Kinsale of a weekend).

    So here is to teaching this new dog some old tricks,


  • My First Attempt at Paint Removal

    Painting a 26ft boat is no small task, and as any wooden boat owners out there will know, the thought of sanding it back to the bare wood every season or two is just too tedious to face sometimes. So I wasn’t completely surprised to find I was scraping off almost half centimetre thick flakes of paint from my hull (I use the word ‘flakes’ loosely here, as most of my ‘flakes’ were more than 2 inches across and impressive structurally sound).

    I decided to start with the deck trim/toe rail as I want to take that back to the bare wood and varnish it. So far I have identified three entirely different colours in multiple layers. You can imagine my elation.

    Needless to say, I gave up on my attempts to scrape and sand it back fairly quickly, and decided instead to turn to my more chemically based friends, paint strippers!

    Below are images of the results I got using Owatarol’s Dilunett paint stripper, recently been re-released as Marine Strip, and I have to say, I was impressed. It liquefied the many, many layers of paint on the toe rails and with just a scraper (as I am currently lacking in electricity, so it is all elbow grease for now) I was able to get most of the trim back to bare wood!



    Mid Removal


    I won’t lie to you, this was still a slow and painstaking job, but at least I was seeing results. The bottle recommends using a pressure washer, which I did not have. But having seen how well the Dilunett liquefied the many, many layers of old paint, I can see how a pressure washer would make it a very quick and easy job.

    I have a friend, who is skilled in removing paint with a gas torch, coming down next week to have a look and see can he help with the hull, because as impressive and effective the Dilunett was on the toe rails and trim, I’m not sure my arms and hands could take a whole 26ft hull of it without a pressure washer to rid it of the liquefied paint.

    With sore arms and tired hands,


shop by categories